Belkin F1UP0001 - Manual (Page 21)

19 18
Web Configuration Web Configuration
19
se
ct
io
n
2
1
3
4
5
6
7
8
9
Web Interface – Channel and SSID
This menu allows the user to program the wireless settings.
•
“Enable Wireless Networking” is on by default. Connecting the Print
Server via an Ethernet cable to the network will automatically disable
wireless networking.
• “SSID” is the wireless name of your network. The default setting is
“ANY”. This allows the Print Server to connect to the first wireless
network it sees. Running the Wizard automatically changes “ANY” to the
network SSID found during the setup procedure.
• “Network Type” refers to either an Infrastructure or Ad-Hoc network.
Any network with a wireless router or access point is considered an
Infrastructure network (default).
• “Channel” is only applicable for Ad-Hoc installations. In infrastructure
networks, the wireless router or access point sets the channel
automatically.
• To see wireless networks in your area and choose the one you wish to
connect to, see “Web Interface – Site Survey” on the next page.
P74496uk_F1UP0001_man.indd 19 20/7/04 12:52:41 pm