Belkin F1UP0001 - Manual (Page 39)

37 36
Belkin Port Monitor Advanced Menu Belkin Port Monitor Advanced Menu
37
se
ct
io
n
2
1
3
4
5
6
7
8
9
7. Add the Print Server’s IP address and the queue name of the
printer you want to select for the port. The queue name “lp1”
will point the port to the printer connected to the printer 1 USB
port on the Print Server. The queue name “lp2” will point the port
to the printer connected to the printer 2 USB port on the Print
Server.
8. Click “OK” to close.
Warning: When manually configuring the Port Monitor to send jobs to a
specific printer, make sure that the correct printer driver is selected and that
the Port Monitor’s queue name corresponds to the USB port that the printer
is connected to on the Print Server. Mismatching the drivers or queue names
will result in failed print jobs or error prints of multiple pages of indiscernible
characters.
P74496uk_F1UP0001_man.indd 37 20/7/04 12:53:28 pm