beautypg.com

Introduction – Belkin F1UP0001 User Manual

Page 4

background image

3

2

Introduction

3

Introduction

Placement of your Wireless Networking Hardware for

Optimal Performance

Your wireless connection will be stronger the closer your computer
is to your Wireless Router or Access Point. Typical indoor operating
range for your wireless devices is between 100 and 200 feet. In the
same way, your wireless connection and performance will

degrade

somewhat as the distance between your Wireless Router or Access
Point connected devices

increases. This may or may not be

noticeable to you. As you move further from your Wireless Router
or Access Point, connection speed may decrease. Factors that can
weaken signals simply by getting in the way of your network’s radio
waves are metal appliances or obstructions, and walls.

If you have concerns about your network’s performance that might be
related to range or obstruction factors, try moving the computer to a
position between five and ten feet from the Wireless Router, in order
to see if distance is the problem. If difficulties persist even at close
range, please contact Belkin Technical Support.

IMPORTANT FACTORS FOR PLACEMENT AND SETUP
Note:

While some of the items listed below can affect network

performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating at
its maximum effectiveness, this checklist may help.

1. Placement of your Wireless Networking Hardware

Place your Wireless Router or Access Point, the central connection
point of your network, as close as possible to the center of your
wireless network devices.
To achieve the best wireless network coverage for your “wireless
clients” (i.e., computers enabled by Belkin Wireless Notebook Network
Cards, Wireless Desktop Network Cards, and Wireless USB Adapters):

• Ensure that your Wireless Router or Access Point networking

antennas are parallel to each other, and are positioned vertically
(toward the ceiling). If your Wireless Router or Access Point itself
is positioned vertically, point the antennas a much as possible in
an upward direction.

P74496uk_F1UP0001_man.indd 2

20/7/04 12:52:12 pm