Operating instructions, Burner locations, Graphic – Neff T69S86N0 User Manual
Page 8: Semi-rapid burner (up to, Rapid burner (up to 2.8 kw), Dual double-flame wok burner up to, Accessories, Table, Table body, Table row

8
Operating instructions
Burner locations
1
Pan supports
2
Control knobs
3
Auxiliary burner (up to 1.1 kW)
4
Semi-rapid burner (up to 1.9 kW)
5
Rapid burner (up to 2.8 kW)
6
Dual double-flame wok burner up to 6 kW
Accessories
Depending on the model, the hob may include the following
accessories. These can also be acquired from the Technical
Assistance Service.
--------
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
Operation
There are indications to show which burner each control knob
operates.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.
Switching on automatically
If your hob can be switched on automatically (ignition
sparkers):
1.
Press the chosen burner control knob and turn it
anticlockwise to the maximum power setting.
While the control knob is still pressed down, sparks are
produced on all burners. The flame ignites.
2.
Release the control knob.
3.
Turn the control knob to the required setting.
If it does not come on, turn the control knob to the off setting
and repeat the steps above. This time, press and hold the
control knob for longer (up to 10 seconds).
:
Risk of deflagration!
If after 15 seconds the flame does not ignite, switch off the
burner and open a nearby window or door. Wait at least one
minute before trying to switch the burner back on.
Additional wok pan support
Only for use on double and
triple-flame wok burners with
pans which are more than
26 cm in diameter, grill pans,
earthenware casserole
dishes, large pans with a
round base, etc.
Additional coffee maker
support
Only for use on the auxiliary
burner with pans which are no
more than 12 cm in diameter.
761$8
2
1