Belkin Range Extender/ Access Point - Manual (Page 44)

41
Changing System Settings
41
se
ct
io
n
1
2
3
4
5
6
7
4.
You will be asked if you are sure you want to continue. Click
“OK”.
5.
You will see one more message. This message tells you that
the WURE may not respond for as long as one minute as the
firmware is loaded and the WURE is rebooted. Click “OK”.
A 30-second countdown will appear on the screen. When the
countdown reaches zero, the WURE firmware update will be
complete. The WURE home page should appear automatically. If
not, type in the WURE’s address (default = 192.168.2.254) into
the navigation bar of your browser.