Belkin Range Extender/ Access Point - Manual (Page 16)

13
Configuring the WURE
13
se
ct
io
n
1
2
3
4
5
6
7
2.2
Release the “Auto Connect” button; the WURE will automatically
associate to the wireless router (or access point) with the
strongest signal. In most cases, this will be the router to
which you positioned the WURE closest.
2.3 Once the WURE has associated to your router (or access
point), the “Searching” light (red) will not illuminate.
2.4
The configuration of your WURE is now complete. The SSID
of your WURE will automatically match the SSID of the wireless
router (or access point) to which it is associated.
3. Reposition
Repositioning the WURE in a Weak Signal Area or Dead Spot
3.1
Reposition the WURE between the wireless router and the
new coverage area.
3.2
Reconnect the power to the WURE and it will automatically
reassociate itself with the last wireless router (or access
point) to which you successfully connected.
Note:
Auto Connect will work only if the wireless router (or access
point) has security disabled.