Belkin Range Extender/ Access Point - Manual (Page 15)

13 12
Configuring the WURE
13 12
Configuring the WURE
Configuring as a Wireless G Universal Range Extender
Auto Connect Button
Auto Connect is a quick and easy method to automatically set up your
WURE to your wireless network. It is designed to remove the need for
users to set the correct SSID and channel. It is as simple as pushing
a button.
Note:
Auto Connect will work only if the wireless router (or access
point) has security disabled.
1. Connect
Connecting the WURE
1.1
Locate and position the WURE next to the router to which
you wish to expand the coverage area.
1.2
Connect the power supply to the WURE. Plug the power
supply into the wall.
1.3
Verify that the “Power” LED and the “Wireless” LED are il-
luminated. The “Searching” LED should be blinking (red).
2. Configure
Configuring with One-Touch Setup
2.1
Push and hold the “Auto Connect” button for 10 seconds.