Belkin Range Extender/ Access Point - Manual (Page 38)

35
Changing System Settings
35
se
ct
io
n
1
2
3
4
5
6
7
3.
The following message will appear. Restoring the defaults
includes restarting the WURE. It can take up to 60 seconds. It
is important not to turn the power off on the WURE during the
restart.
4. A 60-second countdown will appear on the screen. When the
countdown reaches zero, the WURE’s defaults will be restored.
The WURE home page should appear automatically. If it does
not, type in the WURE’s address (default =192.168.2.254) into the
navigation bar of your browser.
Saving a Current Configuration
You can save your current configuration by using this feature. Saving
your configuration allows you to restore it later if your settings are
lost or changed. We recommend that you back up your current
configuration before performing a firmware update.
1.
Click “Save”. A window called “File Download” will open. Click “Save”.