Neff B45E54N3GB - Manual (Page 9)

9
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the symbol for the
desired operating mode illuminates.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
The appliance begins heating.
Notes
■
The / Low-temperature cooking, é Steam cooking and ê
Dough proving cooking operating modes can only be started
if neither • nor œ is displayed on the temperature display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the
± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1. Press and hold the ± info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
™‚‹ appears.
2. Press the ± info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ™„ƒ ).
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. ™„„ ).
4. Press and hold the ± info button for 3 seconds.
Your basic setting is saved.
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm® 160 40 - 200
“ CircoTherm® eco 160 40 - 200
% Top/bottom heat 170 50 - 275
0 CircoTherm intensive 220 50 - 275
ë Bread-baking 200 180 - 220
$ Bottom heat 200 50 - 225
4 Circo-roasting 170 50 - 250
+ Full-surface grill
+ Full-surface grill (inten-
sive)*
220 50 - 275
Fixed setting
( Centre-area grill
( Centre-area grill (inten-
sive)*
180 50 - 275
Fixed setting
/ Low-temperature cooking Fixed setting
é Steam cooking Fixed setting
ê Dough proving Fixed setting
z Oven cleaning Fixed setting
\ Interior lighting Fixed setting
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the temperature display
Temperature dis-
play
Meaning
• Residual heat high (above 120 °C)
œ Residual heat low (between
60 °C and 120 °C)
$ %