Neff B45E54N3GB - Manual (Page 24)

24
Defrost
You can Defrost to defrost delicate pastries particularly well
(e. g. cream cakes).
1. Switch on 3 CircoTherm® operating mode.
2. Using the temperature selector, turn the default temperature
down to 40 °C. Then turn the temperature selector one notch
further anti-clockwise.
Defrost is now set.
A A A appears in the temperature display.
3. Defrost frozen food for 25 - 45 minutes, depending on type
and size.
4. Remove the frozen food from the cooking compartment and
let it thaw for 30 - 45 minutes.
With small quantities (pieces), the defrosting time is shortened
to 15 ­ 20 minutes and the extended defrosting time is
shortened to 10 ­ 15 minutes.
Note: To return to the 3 CircoTherm® operating mode, turn the
temperature selector clockwise. The temperature set for
CircoTherm® appears again in the temperature display.
Cleaning and care
In this section, you will find information on
■
Cleaning and care of your appliance
■
Cleaning agents and aids
■
Self-cleaning surfaces in the cooking compartment
■
Oven cleaning z
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Surface damage due to incorrect cleaning: Do not use any
■
harsh or abrasive cleaning agents
■
cleaning agents that contain alcohol
■
abrasive cleaning aids such as steel wool or scourers.
Observe the specifications in the tables.
Note: Highly recommended cleaning and care products can be
purchased through our after-sales service. Observe the
manufacturer's instructions.
Cleaning the appliance exterior
Cleaning the cooking compartment
Caution!
Risk of damaging the surface. Do not clean the appliance while
still warm, even if using oven cleaners specially intended for
this purpose.
Notes
■
Enamel is baked on at very high temperatures during
manufacture. This can cause some slight colour variation.
This is normal and does not affect its function.
■
The edges of thin trays cannot be completely enamelled. As
a result, these edges may be rough. Anti-corrosion protection
is still guaranteed, however.
Appliance part/surface Cleaning agent/aid
Stainless steel surfaces Apply commercially available washing-up liquid with a soft, damp cloth or chamois; dry
with a soft cloth.
Use cleaners for matted stainless steel if very dirty.
Painted surfaces Apply commercially available washing-up liquid with a soft, damp cloth or chamois; dry
with a soft cloth.
Control panel Apply commercially available washing-up liquid with a soft, damp cloth or chamois; dry
with a soft cloth.
Do not use glass cleaners or glass scrapers.
Door panels Use a commercially available glass cleaner or washing-up liquid with a soft, damp
cloth or chamois; dry with a soft cloth.
The inner door panel on the appliance door has a coating which reduces the tempera-
ture and reflects the heat. The view through the appliance door is not impaired by this.
When the appliance door is open, this coating can have the effect of a light-coloured
film. This is part of the design and is not due to any quality defect.
Appliance part Cleaning agent/aid
Enamel surfaces
(smooth surface)
To facilitate cleaning, you can switch on the interior lighting and detach the appliance
door if necessary.
Apply commercially available washing-up liquid or a vinegar solution with a soft, damp
cloth or chamois; dry with a soft cloth.
Soften baked-on food residues with a damp cloth and detergent.
We recommend using oven cleaner if the oven is very dirty. Observe the manufac-
turer's instructions when cleaning with an oven cleaner.
Leave the cooking compartment open to dry after cleaning.
Self-cleaning surfaces
(rough surface)
Please see the notes in section: Self-cleaning surfaces
Door seal Hot soapy water