Neff C47C62N3GB - Manual (Page 21)

21
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
The length of time after which your appliance switches itself off
depends on the settings that you make.
‹‹‹ flashes in the temperature display. Cooking is interrupted.
Turn the operating mode selector back to the Û position to
deactivate the automatic safety switch-off function. You can now
make new settings.
Care and cleaning
In this section, you will find information on
■
Care and cleaning of your appliance
■
Oven cleaning aid EasyClean®
■
Descaling
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
■
harsh or abrasive cleaning agents
■
oven cleaners
■
corrosive or aggressive cleaners, or those containing
chlorine
■
cleaning agents with a high alcohol content
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage: If descaler or the oven and grill
cleaning gel comes into contact with the front of the appliance
or other sensitive surfaces, wash it off immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled. Burnt-on remains will be much
harder to remove later.
For heavy soiling use the cleaning aid (see section: Cleaning
aid EasyClean®).
Basic settings menu
Sub menu
Basic setting Setting
symbol
Select language Additional languages are
possible.
Childproof lock Lock is not activated ™‚‹
Lock is activated ™‚‚
Permanent lock is activated ™ƒ‚
Audible signal
duration
Audible signal off ™„‹
Audible signal duration
30 seconds
™„‚
Audible signal duration
2 minutes
™„ƒ
Audible signal duration
10 minutes
™„„
Auto start off ™…‹
on ™…‚
Adjust individually - ЩЩЩШЩЩЩ + ™† ...
* Restore the appliance to the factory settings:
■
all changes to the basic settings are deleted
■
Memory is cleared
■
automatic calibration is carried out again
Water hardness
range
softened ™‡‹
1-soft ™‡‚
2-medium ™‡ƒ
3-hard ™‡„
4­very hard ™‡…
Steam heating up
signal
off ™ˆ‹
on ™ˆ‚
Factory settings* Do not restore ™‰‹
Restore ™‰‚
Basic settings menu
Sub menu
Basic setting Setting
symbol
* Restore the appliance to the factory settings:
■
all changes to the basic settings are deleted
■
Memory is cleared
■
automatic calibration is carried out again