Switching on the appliance, Risk of scalding, Note – Neff C47C62N3GB User Manual
Page 11: Press the start button, Fill water tank?" message, Heating indicator, Temperature reached (fig. a), Appliance reheating (fig. b), Current temperature, Displaying and changing the cooking time

11
Switching on the appliance
:
Risk of scalding!
When you open the appliance door and remove the cooking
containers, hot liquids may squirt out because the cooking
containers may have warped. When opening, do not stand too
close to the appliance. Open the appliance door carefully.
Remove the cooking container carefully. Keep children at a
safe distance.
Note: Always use the cooking container and wire rack in their
standard position (not the other way up).
1.
Press the operating mode selector to make it pop out.
The appliance switches on. "Appliance is ready for use"
appears in the text display.
2.
Turn the operating mode selector until the desired operating
mode appears on the text display.
A default temperature appears on the temperature display.
3.
Turn the temperature selector to change the default
temperature.
For operating modes that use steam, a default cooking time
appears in the electronic clock. The
KJ
and
x
(cooking
time) symbols light up.
4.
Turn the rotary selector to change the default cooking time.
The new cooking time is saved automatically after 3 seconds.
You can also set the cooking time for operating modes that
do not use steam (see section: Electronic clock).
5.
Press the Start button.
If you do not press the Start button, a signal sounds and
"Press Start button" appears in the text display.
When using
é
Steam cooking, the cooking time does not start
until the heating-up time has elapsed.
"Fill water tank?" message
This message appears if you set an operating mode and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (fig. A)
■
Appliance reheating (fig. B)
Current temperature
Press the
±
info button.
The current temperature is displayed for 3 seconds.
Displaying and changing the cooking time.
Press the
KJ
clock function button repeatedly until the
KJ
and
x
symbols light up. The current cooking time is displayed.
Turn the rotary selector to change the cooking time. The
change is saved automatically.
Changing the temperature
You can change the temperature at any time. To change the
temperature, turn the temperature selector until the required
temperature is displayed.
Pause
Briefly press the Stop button to interrupt cooking (pause). The
cooling fan may continue running. Press the Start button to
restart.
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the Start
button to restart.
If you have switched on the Auto start, there is no need to
restart the appliance (see section: Basic settings).
"Fill water tank" message
If the water tank is empty, a signal sounds. “Fill water tank”
appears on the display. Cooking is interrupted.
1.
Open the appliance door carefully.
N.B.: Hot steam will escape.
2.
Remove the water tank, fill up to the "max" mark and slide the
tank back in.
3.
Press the Start button.
Switching off the appliance
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to stop the cooking operation.
If you have set a cooking time, cooking is ended automatically.
A signal sounds. Press the
KJ
clock function button to stop
the signal.
The cooling fan may continue to run when you open the
appliance door.
Turn the operating mode selector back to the
Û
position and
push it in to turn off the appliance.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Operating mode
Temperature range Default cooking
time
Steam
35 - 100 °C
20 minutes
CircoSteam®
120 - 230 °C
30 minutes
Hot air
30 - 230 °C
-
Reheat
100 - 180 °C
10 minutes
Prove
35 - 50 °C
30 minutes
Defrost
35 - 60 °C
30 minutes
Slow cook
60 - 120 °C
-
Plate warming
30 - 70 °C
-
Keep warm
60 - 100 °C
-
6WHDPFRRNLQJ
Temperature display
Text display
•
Residual heat high
œ
Residual heat low
$
%