Neff U16E74N3GB - Manual (Page 12)

12
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1. Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2. Press the KJ clock function button repeatedly until
the KJ and x symbols light up.
3. Set the cooking time with the rotary selector
(e.g. ‚ : „‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the appliance switches off
automatically.
1. Turn the operating mode and temperature selector back to
the Û position.
2. Press the KJ clock function button to exit the clock function.
End of operation
Automatic switch-off at a set time.
1. Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2. Press the KJ clock function button repeatedly until the KJ
and y symbols light up.
3. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
1. Turn the operating mode and temperature selector back to
the Û position.
2. Press the KJ clock function button to exit the clock function.
Preset operation
The bottom oven switches on automatically and switches off at
the time preselected for the end of operation. To set this
function, combine the cooking time and end of operation clock
functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1. Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2. Press the KJ clock function button repeatedly until
the KJ and x symbols light up.
3. Set the cooking time with the rotary selector
(e.g. ‚ : „‹ hours).
The setting is applied automatically.
4. Press the KJ clock function button repeatedly until the KJ
and y symbols light up.
5. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ o'clock).
The bottom oven switches off and waits until the correct time
to switch on (in the example at ‚‚ : ‹‹ ). The bottom oven
switches off automatically at the time set for the end of
operation ‚ƒ : „‹
6. Turn the operating mode and temperature selector back to
the Û position.
7. Press the KJ clock function button to exit the clock function.
Setting the clock
You can only change the clock when no other clock function is
active.
1. Press the KJ clock function button repeatedly until
the KJ and 3 symbols light up.
2. Set the clock using the rotary selector.
The setting is applied automatically.