Neff T13D83N2 - Manual (Page 33)

33
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, press and hold the " symbol for
4 seconds
™ and ‚ flash alternately in the left-hand display and ‹ lights up
in the right-hand display.
3. Touch the " symbol repeatedly until the desired indicator
appears in the left-hand display.
4. Touch the + or - symbol repeatedly until the desired setting
appears in the display.
5. Touch the " symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
™„ Energy consumption display(Ask your electricity supply company what the mains voltage is)
‹ Consumption display switched off.*
‚ Consumption display with mains voltage at 230 V.
ƒ Consumption display with mains voltage at 400 V.
„ Consumption display with mains voltage at 220 V.
… Consumption display with mains voltage at 240 V.
™† Automatic timer
‹ Switched off.*
‚ - ŠŠ Cooking time, after which the hotplates switch off
™‡ Duration of the timer end signal
‚ 10 seconds.
ƒ n 30 seconds
„ 1 minute.*
™ˆ Activation of the filament circuits
‹ Switched off.*
‚ Switched on.
ƒ Last setting before the hotplate was switched off.
™Š Time for selecting the hotplate
‹ Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
‚ Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹ Reset to basic setting
‹ Switched off.*
‚ Switched on.
Display Function
* Basic setting