Brother DCP-770W - Manual (Page 49)

For Network Users
47
3
Entering Text
Press a or b repeatedly to select a character from the
list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOP
QRSTUVWXYZ0123456789
(space)!"#$%&'()l+,-./:;<=>?@[\]^_`{|}˜
Press
or repeatedly to move the cursor.
Note
Making corrections
If you entered an incorrect letter and want to
change it, press
or to position the cursor
under the incorrect letter.
Use the a and b keys to change to the correct
letter, then press
repeatedly to move the
cursor back to the end of the text.
4
Restoring the network
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except power cable).
2
Press Menu.
3
Press a or b to choose LAN.
Press OK.
4
Press a or b to choose Factory Reset.
Press OK.
5
Press to select Yes.
6
Press to select Yes.
7
The machine will restart, re-connect cables
once this is complete.