Nokia 6650 Fold - Manual (Page 57)

56
2. After a successful download, to install the update, select Now. To start the installation
later, select Later.
To start the installation process later, select Options > Install update.
If no server profile has been defined, the phone asks you to create one, or if there are several,
to select from a list of servers.
Contact your service provider for server profile settings.
Configure your phone
You may receive configuration settings from your service provider or company information
management department.
To connect to a server and receive configuration settings for your phone, scroll right to Profiles,
scroll to the server profile, and select Options > Start configuration.
To edit a server profile, scroll to the profile, and select Options > Edit profile.
Contact your service provider or company information management department for the
server profile settings.
■ Connection manager
To view detailed information about a connection such as the bearer, status, and the amount
of data sent or received, scroll to the connection and select Open. The details shown depend
on the connection type.
17. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The battery intended for use with this
device is the BP-4L. This device is intended for use when supplied with power from the
following chargers: AC-4, AC-5, AC-8, or DC-4. The battery can be charged and discharged
hundreds of times, but it will eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only Nokia approved batteries,
and recharge your battery only with Nokia approved chargers designated for this device.
Use only replacement batteries qualified with the device per the IEEE-1725-2006 standard.
Use of other batteries or chargers may present a risk of fire, explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger, then disconnect and reconnect it to begin
charging the battery. If the battery is completely discharged, it may take several minutes
before the charging indicator appears on the display or before any calls can be made.