beautypg.com

Power the phone on or off, Access codes, Power the phone on or off access codes – Nokia 6650 Fold User Manual

Page 13: Set time and date

background image

12

Select

>

Settings > Config. > General > Personalization > Display > Power saver

time-out. Scroll left or right to set the time-out, and select OK.

Reduce Notification time-out.
Select

>

Settings > Config. > General > Personalization > Keypad lights >

Notification time-out. Scroll left or right in increments of 10 minutes.

Reduce Display light time-out.

Select >

Settings > Config. > General > Personalization > Display > Light time-out.

Scroll left or right in 5 second increments.

Close open applications not in use.

Leaving applications running in the background increases the demand on battery power
and reduces the battery life.

Applications such as the internet or navigation increase the use of battery power. To see a
list of open applications, press and hold . To close an application, scroll to the application,
press the clear key ("C" located under the power key), and select Yes.

Avoid covering the antenna area of the phone.

Avoid touching the antenna unnecessarily.

See "Antenna locations," p. 20.

During extended operation, such as an active video share call and high speed data connection,
the device may feel warm. In most cases, this condition is normal. If you suspect the device is
not working properly, take it to the nearest authorized service facility.

Power the phone on or off

Press and hold the power/end key.

If the phone asks for a PIN code, enter the PIN code, and select OK.

If the phone asks for the lock code, enter the lock code, and select OK.

Set time and date

To set the correct time zone, time, and date, select the country you are presently in, then
enter the local time and date.

Some networks have automatic updates of time and date. For information on this feature,
contact your service provider.

Access codes

Select >

Settings > Config. > General > Security > Phone and SIM card to set how your

phone uses the access codes.