Nokia 8600 Luna - Manual (Page 87)

54
To define the settings for EGPRS connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and activate the
access point you want to use. Select Edit active access point > Alias for access point, enter a
name to change the access point settings, and select OK. Select Packet data access point,
enter the access point name to establish a connection to an EGPRS network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your PC using the
Nokia Modem Options software. See "Nokia PC Suite," p. 67. If you have set the settings both
on your PC and on your phone, the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another compatible device (for
example, a mobile phone), a compatible PC, or a remote internet server (network service).
Your phone allows data transfer with a compatible PC or another compatible device when
using the phone without a SIM card. Note that when you use the phone without a SIM card,
some functions appear dimmed in the menus and cannot be used. Synchronizing with a
remote internet server is not possible without a SIM card.
Transfer contact list
To copy or synchronize data from your phone, the name of the device and the settings must
be in the list of transfer contacts. If you receive data from another device (for example, a
compatible mobile phone), the corresponding transfer contact is automatically added to the list,
using the contact data from the other device. Server synchronization and PC synchronization
are the original items in the list.
To add a new transfer contact to the list (for example, a mobile phone), select Menu > Settings >
Connectivity > Data transfer > Options > Add transfer contact > Phone synchronization or
Phone copy, and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the transfer contact list and
Options > Edit.
Note: Every individual device must have its own entry in the transfer contact list.
Using one transfer contact for several devices is not possible.
To delete a transfer contact, select it from the transfer contact list, select Options > Delete, and
confirm Delete transfer contact?. You cannot delete Server synchronization or PC synchronization.
Data transfer with a compatible device
For synchronization, Bluetooth wireless technology or a cable connection is used. The other
device is in the standby mode.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer
contact from the list, other than Server synchronization or PC synchronization. According to
the settings, the selected data is copied or synchronized. The other device also must be
activated for receiving data.