Nokia 8600 Luna - Manual (Page 50)

17
■ Open and close the phone
To open the phone, push the slide up using the tab located just above the
4-way scroll key.
To close the phone, push the tab down to the closed position.
To answer calls by opening the slide and end calls by closing the slide,
see Slide call handling in "Call," p. 55.
■ Standby mode
When the phone is ready for use, and you have not entered any characters,
the phone is in the standby mode
.
Display
1 Signal strength of the cellular network
2 Battery charge status
3 Indicators
4 Name of the network or the operator logo
5 Clock
6 Main screen
7 Function of the left selection key is Go to or a shortcut to
another function. See "Left selection key," p. 51.
8 Function of the middle selection key is Menu
9 Function of the right selection key is Names or a shortcut
to another function. See "Right selection key," p. 51.
Operator variants may have an operator-specific name to access an operator-specific website.
Active standby
In the active standby mode there is a list of selected phone features and information on the
screen that you can directly access in the standby mode. To switch on the mode, select
Menu > Settings > Display > Standby mode settings > Active standby > My active standby.
In the standby mode, scroll up or down to activate navigation in the list. To start the feature,
select Select. Left and right arrows at the beginning and end of a line indicate that further
information is available by scrolling left or right. To end the active standby navigation mode,
select Exit.
To organize and change the active standby mode, activate the navigation mode, and select
Options > Active standby > My active standby > Options and the following options:
Personalize—Assign or change phone features in the standby mode.
Organize—Move the position of features in the standby mode.