Nokia 8600 Luna - Manual (Page 53)

20
3. Call functions
■ Make a call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the + character replaces
the international access code), enter the country code, the area code without the leading
0, if necessary, and the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key.
To search for a name or phone number that you have saved in Contacts, see "Search for a
contact," p. 45. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call the
number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See "1-touch dialing," p.
48. Call the number in either of the following ways:
• Press a 1-touch dialing key, then the call key.
• If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the call begins.
See 1-touch dialing in "Call," p. 55.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of the phone.
A voice command is added automatically to all entries in the contact list of the phone.
If an application is sending or receiving data using a packet data connection, end the
application before you use voice dialing.
Voice commands are language-dependent. To set the language, see Voice playback language
in "Phone," p. 56.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or press and hold the volume
down key. A short tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the headset
key to start the voice dialing.