Nokia 6256i - Manual (Page 81)

80 Copyright © 2005 Nokia
Set the alarm tone
You can set which tone is played when the alarm sounds.
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone .
2. Highlight Standard , Radio , Ringing tone , or Open Gallery to choose the tone
of your choice, and press Select .
Use the radio alarm clock
To use the radio, always connect a headset first. The FM radio uses the wire of the
headset as an antenna. A compatible headset needs to be attached to the device
for the FM radio to function properly.
After selecting the radio for the alarm tone and setting the time for the alarm,
connect a headset.
In the standby mode, select Menu > Media > Radio > Options > Loudspeaker :
1. Set the frequency of the radio station to use for the alarm. See "Use the
radio," p. 57.
2. Set the volume using the Volume key. See "Keys and parts," p. 9.
3. Select Options > Turn off . Press Exit to return to the standby mode.
4. Leave the headset connected.
The alarm will turn the radio on at the set time, playing through the loudspeaker.
Alarm conditions
When the alarm sounds, your phone beeps, vibrates, and the display lights up.
With the phone on, press OK to shut the alarm off, or press Snooze . The alarm
stops for 10 minutes and Snooze on appears in the display.
If you do not press a key, the alarms stops (snoozes) for 10 minutes, then
sounds again.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you press
Stop , the device asks
whether you want to activate the device for calls. Press No to switch off the
device or Yes to make and receive calls. Do not press Yes when wireless phone use
may cause interference or danger.
Turn an alarm off
In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off .