Nokia 6256i - Manual (Page 48)

47 Copyright © 2005 Nokia
Contacts (Menu 3)
2. Use the Four-way scroll key to highlight a group, and press Select to display
the following caller group options:
Group name —Rename the group to your preference.
Group ringing tone —Set the ringing tone for the group.
Group members —Add or remove members from the caller group.
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2–9; then dial
those entries by pressing and holding the assigned key. T o activate or deactivate,
see "1-touch dialing," p. 65.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing .
2. Scroll to an (empty) 1-touch dialing slot, and press Assign .
3. Enter the number (including the area code), and press OK ; or press Search to
retrieve a number from the contacts list.
4. Enter a name for the number, and press OK .
If 1-touch dialing is off, the phone displays a prompt asking if you would like
to turn 1-touch dialing on.
5. Press Yes to activate 1-touch dialing.
Change 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing .
2. Scroll to the 1-touch dialing entry you wish to change, and select
Options > Change .
3. Enter the new number; or press Search to retrieve a number from the
contacts list, and press OK .
4. Enter a name for the entry, and press OK .
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing .
2. Scroll to the 1-touch dialing location you wish to delete, and press Options .
3. Select Delete > Yes .