Nokia 6256i - Manual (Page 65)

64 Copyright © 2005 Nokia
4. Scroll to Date format , and press Select .
5. Select the format of your choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network Services," p. 6 for more
information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area, for
instance when you have traveled to another network or time zone.
In the standby mode, select Menu > Settings > Time and date settings > Auto-
update of date & time > On , Confirm first , or Off .
If you use the Auto-update of date & time option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery has been removed or has drained outside the digital network, you
may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call settings
Location info sharing
Location info sharing is only available for the Nokia 6256i phone. Location info
sharing is a network service. See "Network Services," p. 6 for more information.
If your wireless service provider supports this feature, then location info sharing
allows the phone to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the phone. The functionality and accuracy
of this feature is dependent on the network, satellite systems, and the agency
receiving the information. It may not function in all areas or at all times.
In the standby mode, select Menu > Settings > Call settings > Location info
sharing > 911 only or Location on > Yes or No .
911 only —This is the default profile. The phone location information is shared
only during an emergency call to the official emergency number programmed
into your phone. The phone screen displays
in the upper left hand corner of
the screen in the standby mode.