Nokia 6256i - Manual (Page 40)

39 Copyright © 2005 Nokia
Messages (Menu 1)
■ Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note that:
• Voice tags are not language dependent. They are dependent on the
speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, select Names and use the Scroll up key or Scroll down
key to find the contact you want.
2. Highlight the contact you want to assign a voice tag, press Details > Options >
Add voice tag > Start .
3. Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone automatically stops recording and saves and replays the voice tag.
The
icon appears next to commands which have voice tags assigned.
If recording is not successful, your phone displays Voice system error .
Press Options > Add voice tag , and repeat Step 3.
Dial a number
1. Press and hold Names .
2. When you hear several beeps and Please speak now appears, release the key.