Nokia 6256i - Manual (Page 77)

76 Copyright © 2005 Nokia
Automatic B —The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
3. Press OK , if necessary, to confirm the activation.
Mode
You can choose whether your phone uses digital or analog service.
1. In the standby mode, select Menu > Settings > Network > Mode .
2. Select one of the following service options:
Digital preferred —The phone works in digital mode, but will also work in
analog mode when digital mode is unavailable.
Digital only —The phone only works in digital mode.
Analog per call —Allows analog calls for several minutes. Once the call ends,
the phone searches for a digital network.
IS-95 per call —Allows calls on the IS-95 network. If no calls are placed ten
minutes after IS-95 selection, calls return to the previous network selection.
■ Network services
The following features are network services. See "Network Services," p. 6 for
more information.
Store a feature code
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting .
2. Enter the feature code from your service provider (for example, *86), and
press OK .
3. Select the service that matches the feature code you entered (for example,
Call forwarding ).
The activated feature code is now stored in your phone, and you are returned
to the
Feature code: field. Continue entering other feature codes (for
example, *633), or press the End key to return to the standby mode.
Note: Once you enter a network feature code successfully the feature
becomes visible in the
Network services menu.