Nokia 6256i - Manual (Page 68)

67 Copyright © 2005 Nokia
Settings (Menu 7)
5. Press and hold the Send key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, press OK .
International prefix
For international calls, press the */+ key twice for the international prefix (the +
character replaces the international access code) and then key in the country
code, the area code without 0, and the phone number.
Calls described here as international, in some cases, may be made between
regions of the same country.
Data/fax calls
Data or fax calls is a network service. See "Network Services," p. 6 for
more information.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
. 1. In the standby mode, select Menu > Settings > Call settings > Data/fax calls >
Incoming data/fax call .
2. Select one of the following options:
Normal —The phone receives incoming calls as usual.
Data calls only —The phone receives only data calls.
Fax calls only —The phone receives only fax calls.
3. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and
select Normal .
Data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select Menu > Settings > Call settings > Data/fax calls >
Data rate display > Graphic or Off .
Call summary
Your phone can display the time spent on a call when you hang up.
In the standby mode, select Menu > Settings > Call settings > Call summary >
On or Off .