Nokia 6236i - Manual (Page 71)

S e t t i n g s
70
Roaming options
You can set your device to roam or search for another network when you are not
in your home area.
1. In the standby mode, select Menu > Settings > Network > Roaming options .
2. Select one of the following options:
Home only —You can make and receive calls in your home area only.
Automatic A/Automatic B —The device automatically searches for service in
another digital network. The roaming rate applies when not in the home
service area.
3. Select OK , if necessary, to confirm the activation.
Mode
You can choose whether your phone uses digital service.
1. At the start screen, select Menu > Settings > Network > Mode .
2. Select one of the following service options:
Digital preferred —The phone works in digital mode, but will also work in
analog mode when digital mode is unavailable.
Digital only —The phone only works in digital mode.
IS-95 per call —Allows calls on the IS-95 network. If no calls are placed ten
minutes after IS-95 selection, calls return to the previous network selection.
■ Network services
The following features are network services. See "Network Services," p. 7.
Store a feature code
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting .
2. Enter the feature code from your service provider (for example, *633), and
select OK .
3. Select the type of service that matches the feature code you entered
(for example, call forwarding).
The activated feature code is now stored in your device, and you are returned to
the
Feature code: field. Continue entering other feature codes (for example, *633),
or press the end key to return to the start screen. Once you enter a network feature
code successfully the feature becomes visible in the
Network services menu.