Nokia 6236i - Manual (Page 69)

S e t t i n g s
68
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your device (for example, 911) or the
number stored in the
Allowed no. when phone locked location:
1. In the standby mode, select Menu > Settings > Security settings .
2. Enter the lock code, and select OK . See "Change lock code," p. 68.
3. Select Allowed no. when phone locked . Highlight an empty folder and select
Assign and enter the phone number; or select Assign > Search to recall the
number from Contacts . Select OK .
Call the allowed phone number
1. In the standby mode, enter the number or select Names > Search for the
number you wish to call.
2. Select Options and enter the lock code. Select OK.
3. Press the send key to activate the call.
Change lock code
Avoid using codes similar to emergency numbers such as 911 to prevent
accidental dialing of the emergency number.
The preset lock code is 1234 or the last four digits of your phone number. If you
enter an incorrect lock code five times in a row, your device will prompt you for
the lock code.
If you enter the wrong lock code 5 times in succession, you will not be able to enter
a code for 5 minutes, even if you power off the device between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings > Change
lock code .
2. Enter the new lock code (must be 4 characters in length), reenter the new
lock code for verification, and select OK .
When you change your lock code, make sure you store it in a safe place, away
from your device. Avoid entering access codes similar to emergency numbers to
prevent accidental emergency calls.
Call restrictions
Call restrictions is a network service. See "Network Services," p. 7.