Nokia 6236i - Manual (Page 32)

M e s s a g e s
31
If blinks and Multimedia me-mory full. View waiting msg. is displayed, memory
for multimedia messages is full. To view the waiting message, select Show . Before you
can save the message, delete some of your old messages. See ’Delete messages,’ p. 33.
Reply to multimedia message
Select Reply or Reply to all to enter a reply and send it to the original sender and
any other message recipients.
■ Voice messages
If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device lets you know by beeping, displaying
a message, or both. If you receive more than one message, your device shows the
number of messages received.
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your device. Select
OK to leave the number unchanged.
1. In the standby mode, select Menu > Messages > Voice messages > Voice
mailbox number . The Voice mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number, and select OK .
Call and setup voice mail
1. Once you have saved the voice mailbox number, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins,
follow the automated instructions to setup voice mail.
Listen to voice messages
Once you have set up voice mail, press and hold 1, or use the Messages menu to
dial the voice mailbox number. Once you connect and the prerecorded greeting
begins, follow the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow them
in the dialing string. See ’Setup phone numbers with dialing codes,’ p. 38.