Nokia N76 - Manual (Page 131)

Settings
99
Standby mode
Active standby —Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 49.
Shortcuts > Left selection key and Right selection key —
Assign a shortcut to the selection keys in the standby
mode.
Active standby apps. —Select the application shortcuts
you want to appear in the active standby. This setting is
only available if
Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo —This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Language
Phone language —Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations.
Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language —Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text —Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Cover display
Brightness —Close the fold, and use the volume key to
adjust the brightness on the cover display.
Answer if fold opened —Select Yes if you want to answer
incoming calls by opening the fold.
Sleep mode —Select whether the display is switched off to
save battery power after the power saver is activated.
When the display is switched off, an LED blinks to indicate
that the device is powered on.
Enhancement
For enhancement indicators, see ‘Essential
indicators’, p. 17. Some enhancement connectors do not
indicate which type of an enhancement is connected to
the device.