Make calls, Voice calls – Nokia N76 User Manual
Page 110
Make
calls
78
Make calls
Voice calls
1
In the standby mode, enter the phone number,
including the area code. To remove a number, press
.
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2
Press
to call the number.
3
Press
to end the call (or to cancel the call
attempt). Pressing
always ends a call, even if
another application is active. Closing the fold does not
end an active voice call.
To adjust the volume during a call, use the volume keys on
the side of your device. If you have set the volume to
Mute
, select
Unmute
first.
To make a call from
Contacts
, press
, and select
Contacts
. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
.
You must copy the contacts from your SIM card to
Contacts
before you can make a call this way. See ‘Copy
To call a recently dialed number in the standby mode, press
. Scroll to the number, and press
.
To send an image or a video clip in a multimedia message
to the other participant of the call, select
Options
>
Send
MMS
(in UMTS networks only). You can edit the message
and change the recipient before sending. Press
to send
the file to a compatible device (network service).
To send DTMF tone strings (for example, a password),
select
Options
>
Send DTMF
. Enter the DTMF string or
search for it in
Contacts
. To enter a wait character (w) or
a pause character (p), press
repeatedly. Select
OK
to
send the tone. You can add DTMF tones to the
Phone
number
or
DTMF
fields in a contact card.
To put an active voice call on hold while answering another
incoming call, select
Options
>
Hold
. To switch between
the active and the held call, select
Options
>
Swap
. To
connect the active and held calls and drop yourself from
the line, select
Options
>
Transfer
.
Tip! When you have only one active voice call, to put
the call on hold, press
. To activate the call, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select
Activate loudspeaker
. If you