Nokia N76 - Manual (Page 118)

Make
calls
86
Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data
connections registered by the device, press
, select
Applications > Log , and press to open the general
log.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Save to Contacts .
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select
Options >
Clear log . Select Yes to confirm. To remove a single event
from the log, press .
To set the log duration, select Options > Settings > Log
duration . If you select No log , all the log contents, recent
calls register, and messaging delivery reports are
permanently deleted.
Tip! In the details view, you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select
Options > Copy number .
To view from the packet data counter how much data is
transferred and how long a certain packet data connection
lasts, scroll to an incoming or outgoing event indicated by
Pack. , and select Options > View details .
Push to talk
Press , and select Tools > PTT .
Push to talk (PTT) (network service) is a real-time voice
over IP service implemented over a GSM/GPRS network.
Push to talk provides direct voice communication
connected with the push of a key. Use push to talk to have
a conversation with one person or with a group of people.
Before you can use push to talk, you must define the
push-to-talk access point and push-to-talk settings. You
may receive the settings in a special text message from the
service provider that offers the push-to-talk service. You
can also use the
Sett. wizard application for
configuration, if supported by your service provider.
In push-to-talk communication, one person talks while the
others listen through the built-in loudspeaker. Speakers
take turns responding to each other. Because only one
group member can talk at any time, the maximum duration