Nokia 6086 - Manual (Page 83)

F u n & A p p s
50
Save channels
1. To start the channel search, select and hold or . To change the radio
frequency in 0.05 MHz steps, press or .
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key.
3. To save the channel in the memory location from 10 to 20, press 1 or 2,
and press and hold the number key (0 to 9) you want.
4. Enter the name of the channel, and select OK .
Listen
1. Select Menu > Fun & Apps > Media > Radio .
2. To scroll to the channel you want, select , , or press the headset key.
3. To select a radio channel location, briefly press the corresponding number keys.
4. Select Options and one of the following options:
Turn off — to turn off the radio
Save station — to save a new channel by entering the channel’s name
Loudspeaker or Headset — to listen to the radio using the loudspeaker
(limited to FM radio) or headset. Keep the headset connected to the phone.
The lead of the headset functions as the radio antenna.
Mono output or Stereo output — to listen to the radio in monophonic sound
or in stereo
Stations — to select the list of saved channels. To delete or rename a channel
or edit the visual service ID, scroll to the channel you want, and select
Options > Delete station or Rename .
Search all stations — to start automatic search and save function for all available
radio channels. The search picks up only the strongest available radio channels.
Set frequency — to enter the frequency of the radio channel you want.
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
Recorder
You can record pieces of speech, sound, or an active call. This is useful when
recording a name and phone number for writing them down later.