Add ringing tones for contacts, Create contact groups, Remove members from a group – Nokia N70 User Manual
Page 33: See ‘add ringing tones for, Contacts’, p. 32, Contacts (phonebook)
Contacts (Phonebook)
32
Copyright © 2006 Nokia. All rights reserved.
To restrict calls from your device to selected phone
numbers, select
Options
>
Activ. fixed dialling
. To add
new numbers to the fixed dialling list, select
Options
>
New SIM contact
. You need the PIN2 code for these
functions.
When you use
Fixed dialling
, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient’s phone number must be
included on the fixed dialling list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognises it).
1
Press
to open a contact card, or go to the groups
list, and select a contact group.
2
Select
Options
>
Ringing tone
. A list of ringing tones
opens.
3
Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select
Default tone
from the
list of ringing tones.
Create contact groups
1
In
Contacts
, press
to open the groups list.
2
Select
Options
>
New group
.
3
Write a name for the group or use the default name
Group %N
, and select
OK
.
4
Open the group, and select
Options
>
Add members
.
5
Scroll to a contact, and press
to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select
OK
to add the contacts to the group.
To rename a group, select
Options
>
Rename
, enter the
new name, and select
OK
.
Remove members from a group
1
In the groups list, open the group you want to modify.
2
Scroll to the contact, and select
Options
>
Remove
from group
.
3
Select
Yes
to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
Options
>
Belongs to
groups
.
R1112_en.book Page 32 Monday, February 13, 2006 4:20 PM