Caution – Brother NX-400 User Manual
Page 36
GETTING READY ———————————————————————————————————————————————————
30
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
a
Press
(settings key) in the operation panel.
X
The settings screen appears.
b
Press
,
,
and
(arrow keys) until
is selected.
c
Press
(OK key).
X
The screen for selecting the twin needle
appears.
d
Press
to
select .
To return to
, press
.
X
The twin needle can now be used.
e
Press
(OK key).
X
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• Even after the sewing machine is turned off,
the twin needle setting is not cancelled.
f
Select a stitch.
• For details on selecting a stitch, refer to
“Selecting stitching” (page 68).
• For details on the stitches that can be sewn
with the twin needle, refer to “Stitch
Settings” (page 128).
g
Start sewing.
• For details on starting to sew, refer to
X
Two lines of stitching are sewn parallel to
each other.
●
When using the twin needle, be sure to
select the twin needle setting, otherwise
the needle may break or the machine
may be damaged.
CAUTION
●
When using the twin needle, be sure to
select an appropriate stitch, otherwise
the needle may break or the machine
may be damaged.
●
When changing the sewing direction,
press
(needle position button) to
raise the needle from the fabric, and then
raise the presser foot lever and turn the
fabric.
CAUTION
CAUTION