Brother NX-400 User Manual
Page 21
Changing the Machine Settings 15
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
■ List of stitch or machine attribute
The stitch or machine attribute that can be set are listed below. For details on each attribute, refer to the
corresponding reference page.
Attribute
Icon
Details
Reference
Automatic
reverse/
reinforcement
stitching
Specifies automatic reverse/reinforcement stitching.
Automatic
thread-
cutting
Specifies automatic thread-cutting.
Check
pattern
Allows combined patterns to be checked.
Left/right
mirror
imaging
Mirror images patterns along a vertical axis.
Pattern
length
Adjusts the length of satin stitches.
Pattern size
Sets the size of patterns to be large or small.
Repeated/
single sewing
Specifies whether the pattern will be sewn once or
repeatedly.
Stitching
density
Specifies the sewing density of the stitching.
Save settings
Allows adjusted pattern widths and lengths to be
saved.
Needle
position
Specifies where the needle is positioned when the
sewing machine is stopped.
Twin needle
sewing
Specifies the twin needle.
Stitch width
control
Allows the stitch width to be adjusted with the
sewing speed controller.
Language
Allows the language used in the screens to be
changed.
Buzzer
Specifies whether or not a beep is sounded with
each operation.
LCD
brightness
Adjusts the brightness of the LCD.
Vertical
pattern
adjustment
Adjusts the up and down position of the pattern.