Brother NX-400 User Manual
Page 117
Decorative Stitching 111
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Partially removing threads is called “drawnwork”.
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■ Drawnwork (Example 1)
1
Pull out several threads from the fabric.
2
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
3
Select stitch
33
.
• For details, refer to “Selecting stitching”
4
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
5
Press
(settings key) in the operation panel.
X
The settings screen appears.
6
Press , ,
and
(arrow
keys)
until
is selected.
7
Press
(OK key).
X
The screen for mirror imaging the pattern
appears.
8
Press
to select
.
To return to
, press
.
X
The pattern is flipped.
9
Press
(OK key).
X
The initial stitch screen appears again.
0
Sew along the other edge of the frayed section
so that it looks like the previous stitching.
a
Set the mirror image pattern setting back to
.
N
N