Brother NX-400 - Manual (Page 33)

GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Upper Threading 27
Threading the needle
The needle threader can be used with needle size
75/11 through 100/16. For more details on the
needle, refer to “Needle types and their uses”
(page 33).
1
With your left hand, hold the end of the
thread passed through the needle bar thread
hook, and then pass the thread through the
thread guide discs from the front.
1 Thread guide discs
2 Pass to the back.
3 Pass through the slit.
2
Cut the thread with the cutter on the left side
of the machine.
1 Thread cutter
3
Lower the presser foot lever.
1 Presser foot lever
X The presser foot is lowered.
4
Lower the needle threader lever until it clicks.
1 Needle threader lever
X The thread is passed through the eye of the
needle.
5
Release the needle threader lever.
6
Carefully pull on the loop of thread passed
through the eye of the needle to pull out the
end of the thread.
1
2
3
5
1
1
1