Realigning the pattern – Brother NX-400 User Manual
Page 127
Sewing the Various Built-In Decorative Patterns 121
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
5
Press
(OK key).
X
The contents of the selected pocket are
displayed.
6
Check the contents, and then press
(OK
key).
To select a different pocket, press
(back
key).
X
The initial stitch screen appears again, and
the pattern from the selected pocket is
recalled.
Realigning the pattern
The pattern may not be sewn correctly, depending
on the type of fabric being sewn or the sewing speed.
If this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
1
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
2
Press
(stitch selection key) in the
operation panel.
X
The screen containing the various types of
stitches appears.
3
Press , ,
and
(arrow
keys)
until
is selected, and then select
.
X
The pattern alignment stitch is selected.
4
Start sewing.
X
The pattern for making the adjustment is
sewn.
X
The sewing machine stops after it has
finished sewing the pattern.