Toshiba AT200 - Manual (Page 64)

This section only applies to models with 3G modules.
Inserting a SIM card
To insert a SIM card, follow the steps as detailed below:
1.
Turn off your tablet.
2. Turn the SIM card so that the contacts (metal areas) are facing down.
3. Remove the slot cover and insert the SIM card into the SIM card slot
on the tablet and push it until you hear a click.
Figure 7-2 Inserting a SIM card
1
2
1. SIM card slot 2. SIM card
Now you can power on your tablet to use your provider’s mobile networks.
Removing a SIM card
To remove a SIM card, follow the steps as detailed below:
1.
Turn off your tablet.
2. Remove the slot cover and push the SIM card until you hear a click to
partially release it.
3. Grasp it and pull it out of the slot.
USB device
This tablet is equipped with a micro USB port supporting OTG technology.
This allows you to connect the following USB devices to the tablet: USB
flash memory, and HID (Keyboard and Mouse). This port complies with
USB 2.0 standard.
To connect a USB device, you must purchase an OTG cable. This item is
available from your reseller or TOSHIBA dealer.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
This tablet does not support a printer.
TOSHIBA AT200
User's Manual 7-4