Toshiba AT200 - Manual (Page 20)

Always use or purchase power cables that comply with the legal
voltage and frequency specifications and requirements in the country
of use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
When you connect the AC adaptor to the tablet, always follow the
steps in the exact order as described in the User’s Manual.
Connecting the plug to a live electrical outlet should be the last step
otherwise the DC output plug could hold an electrical charge and
cause an electrical shock or minor bodily injury when touched. As a
general safety precaution, avoid touching any metal parts.
Never place your tablet or AC adaptor on a wooden surface, furniture,
or any other surface that could be marred by exposure to heat since
the tablet base and AC adaptor's surface increase in temperature
during normal use.
Always place your tablet or AC adaptor on a flat and hard surface that
is resistant to heat damage.
1. Plug the USB connector of the power cable into the USB port on the
AC adaptor.
Figure 3-3 Connecting the AC adaptor 1
2-pin
3-pin
2. Plug the power connector of the power cable into the docking interface
on your tablet.
Figure 3-4 Connecting the AC adaptor 2
3. Plug the AC adaptor into a live wall outlet.
TOSHIBA AT200
User's Manual 3-8