Toshiba Tecra A7 - Manual (Page 35)

User’s Manual 2-5
The Grand Tour
Back side
The figure below shows the computer’s back side.
The computer’s back side
DC IN 15V
LAN jack USB Ports Parallel port *
Parallel port This Centronics-compatible, 25-pin parallel port is used
to connect a parallel printer or other parallel device.
This port supports Extended Capabilities Port (ECP)
standard. (Provided with some models)
Universal
Serial Bus
Ports
The two Universal Serial Bus (USB) ports comply with
USB Serial 2.0 standards, which enables data transfer
speeds 40 times faster than the USB 1.1 standards.
(The ports also support USB 1.1)
Keep foreign objects out of the USB connectors. A pin or similar object can
damage the computer’s circuitry.
Operation of all functions of all USB devices has not been confirmed.
Some functions might not execute properly.
LAN jack This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T), Fast Ethernet LAN (100 megabits
per second, 100BASE-Tx) or Giga-bit (depend on model
you purchased). The LAN has two indicators.
See Chapter 4, Operating Basics , for detailes.
DC IN 15V The AC adaptor connects to this socket. Use only the
model of AC adaptor that comes with the computer.
Using the wrong adaptor can damage your computer.