Toshiba Tecra A7 - Manual (Page 125)

User’s Manual 8-10
Optional Devices
Additional AC adaptor
If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load:
■ PA2521U-3ACA/PA2521E-2AC3.
Battery Charger
The battery charger provides a convenient way to charge battery packs
without requiring the use of your computer.The battery charger holds up to
two battery packs (lithium iron):
■ PA3471U-1CHG/PA3471E-1CHG.
USB FDD Kit
The 3 1/2" external FDD drive module can be connected to the USB port.
For details on connecting the 3 1/2" external diskette drive module, refer to
Chapter 4, Operating Basics .
Advanced Port Replicator III Plus
In addition to the ports available on the computer, the Advanced Port
Replicator III Plus provides serial port and separate ports for PS/2 mouse
and PS/2 keyboard. The Advanced Port Replicator connects directly to the
docking interface on the underside of the computer. The AC adaptor
connects the Advanced Port Replicator to a power source.
■ PA3474U-1PRP
■ PA3474E-1PRP
■ PA3474Z-1PRP.
The following ports and accessories are available on the Port Replicator III
Plus:
■ RJ45 LAN jack
The computer must be configured before connecting to a LAN. Logging
onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
■ You must connect the AC adaptor before you connect to an Advanced
Port Replicator III Plus.
■ When an Advanced Port Replicator III Plus is connected to the
computer, you can not use the following computer's ports: Modem jack,
LAN jack, DC IN 15V jack, External monitor port, i.LINK (IEEE 1394)
port.