Replacing the battery, Placing slim size remote controller – Toshiba SATELLITE A500 User Manual
Page 70
2-28
User’s Manual
Satellite A500/A500D
3. Close the battery cover. Close the cover securely until it clicks.
Figure 2-18 Closing the battery cover
Replacing the battery
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
Figure 2-19 Removing the batteries
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.
Placing Slim size remote controller
Inserting a Slim size remote controller
To insert a Slim size remote controller, follow the steps as detailed below:
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert a Slim size remote controller.
Figure 2-20 Inserting a Slim size remote controller
3. Press a Slim size remote controller gently to ensure a firm connection is
made.