Toshiba Camileo Z100 - Manual (Page 43)

43
EN
Section 6
Viewing Photos and Videos on TV
Connecting to a 3D compatible TV
1. Connect the HDMI cable to your camcorder’s HDMI port.
2. Connect the other end of the cable to the 3D TV.
3. Make the necessary settings on the 3D TV. (For further details, please refer to the instructions of
your TV.)
4. The steps for viewing the stored 3D videos and photos on a 3D TV are exactly the same as for
viewing them on the LCD monitor.
3D TV
Note
• Some functions may not be accessible while the camcorder is connected to an TV.
• The camcorder can not run thumbnail screen while the camcorder is connected to an TV.
Connecting to a High-Definition 16:9 (Wide) TV
1. Connect the HDMI cable to your camcorder’s HDMI port.
2. Connect the other end of the cable to a HDTV.
3. Set the video input source of your TV to “ HDMI.”
4. The steps for viewing stored videos and photos on an HDTV are exactly the same as for viewing
them on the LCD monitor.
(16:9)
Note
• Some functions may not be accessible while the camcorder is connected to an HDTV.
• The camcorder can not run thumbnail screen while the camcorder is connected to an HDTV.