Toshiba Camileo Z100 - Manual (Page 11)

11
EN
Writeable
position
Write-Protected
Position
Inserting and Removing an SD Card (Optional)
The camcorder comes with internal memory which allows you to
store photos and videos. You can expand the memory capacity by
using an optional SD memory card.
1. Open the SD Card cover.
2. Insert the memory card into the slot. Please refer to the figure
on the right side.
3. To remove the installed SD card, press the card inwards to
release it.
4. When the card pops out, gently remove it from its slot.
5. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved on
the card rather than on the built-in memory.
• Protecting Data on an SD Card: SD Card is read-only when
it is locked. No photos or videos can be recorded when the
SD card is locked. Make sure the lock is on the writeable
position before recording any media.
Turning the Camcorder On and Getting Started
• To turn on the camcorder:
1. Flip out the LCD panel; the camcorder will turn on automatically.
2. Or press the [Power Button] for one second to turn it on.
• To record video: Press the [Video Button] to record video. To stop recording, press it again.\
• To pause recording: Press the [Pause Button] to pause recording. To continue the recording,
press it again.
• To snapshot a photo during video recording: Press the [Photo Button] to capture the image.
• To take a photo: Press the [Photo Button] to take photo.
• To view stored videos and photos: Tap (on-screen icon) to switch to the Playback mode.