Toshiba Qosmio X500 - Manual (Page 142)

User’s Manual 7-2
HW Setup
User Password
Lets you register a new password or un-register an existing password.
Owner String
This blank field is used to display a message when the password field is
displayed on startup. If a password is not registered the message will not
be shown. The maximum length is 256 characters.
Display
This tab lets you select the internal LCD or external monitor when the
computer boots up.
Power On Display
Lets you select the display to be used when the computer is booted (this
setting is only available on Standard VGA mode and not available on
Windows Desktop).
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. You can change the
boot priority from the device list.
Button Setting
Function Button
This feature allows you to set conditions for the Power Button and/or the
other buttons.
Not Registered Un-registers an existing password
Registered Register a new password by following the on
screen instructions
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
System LCD Only Selects the internal LCD, even if an external
monitor is connected.
Enabled Enables the function button
Disabled Disables the function button