beautypg.com

Wireless communications, Wireless communications -38, Cd/dvd/bd – Toshiba Qosmio X500 User Manual

Page 117

background image

User’s Manual

4-38

Operating Basics

CD/DVD/BD

1. Store your CD/DVD/BD in the container they came in to protect them

and keep them clean.

2. Do not bend the CD/DVD/BD.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the

CD/DVD/BD that contains data.

4. Hold the CD/DVD/BD by its outside edge or the edge on the centre

hole. Fingerprints on the surface can prevent the drive from properly

reading data.

5. Do not expose your CD/DVD/BD to direct sunlight, extreme heat or

cold. Do not place heavy objects on your CD/DVD/BD.

6. If your CD/DVD/BD become dusty or dirty, wipe them with a clean dry

cloth. Wipe from the centre out, not in a circular direction around the

CD/DVD/BD. If necessary, use a cloth dampened in water or a neutral

cleaner. Do not use benzine, thinner or similar cleaners.

Wireless communications

The computer’s wireless communication function supports both Wireless

LAN and Bluetooth devices.

Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a

microwave oven or in areas subject to radio interference or magnetic

fields. Interference from a microwave oven or other source can disrupt

Wi-Fi or Bluetooth operation.

Turn Wi-Fi and Bluetooth functionalities off when near a person who

may have a cardiac pacemaker implant or other medical electric

device. Radio waves may affect pacemaker or medical device

operation, possibly resulting in serious injury. Follow the instruction of

your medical device when using any Wi-Fi or Bluetooth functionality.

Always turn off Wi-Fi or Bluetooth functionality if the computer is near

automatic control equipment or appliances such as automatic doors or

fire detectors. Radio waves can cause malfunction of such equipment,

possibly resulting in serious injury.

It may not be possible to make a network connection to a specified

network name using the ad hoc network function.

If this occurs, the new network(*) will have to be configured for all

computers connected to the same network in order to re-enable

network connections.

* Please be sure to use the new network name.

This manual is related to the following products: