Toshiba Libretto W100 - Manual (Page 58)

User’s Manual 4-10
Operating Basics
How to Delete the Face Recognition Data
Delete image data, account information, and personal record data created
during registration. To delete the Face Recognition Data, follow the steps
as described below:
1. To launch this utility, tap Start All Programs TOSHIBA
Utilities Face Recognition. The Management screen is displayed.
2. Select a user which is displayed in the Management screen.
3. Tap the Delete button. "You are about to delete the user
data. Would you like to continue?" will be displayed on the
screen.
■ If you do not want the data to be deleted, tap the No button and you
will then be returned to the Management screen.
■ Tapping on the Yes button will remove the selected user from the
Management screen.
How to launch the help file
For further information on this utility, please refer to help file.
1. To launch the help file, tap Start All Programs TOSHIBA
Utilities Face Recognition Help.
Windows Logon via TOSHIBA Face Recognition
This section explains how to login to Windows with TOSHIBA Face
Recognition. Two authentication modes are provided.
■ 1:N Mode Login mode: It will automatically start facial authentication
without requiring the selection of a user account.
■ 1:1 Mode Login mode: It will verify the face for a selected user
account.
1:N Mode Login screen
1. Turn on the computer.
2. The Select Tiles screen will be displayed.
3. Select Start face recognition (
).
4. "Please face the camera" will be displayed.
5. Verification will be performed. If the authentication is successful, the
image data taken in step 4 will be faded in and placed over one another.
■ If an error occurs during authentication, you will be returned to the
Select Tiles screen.
6. The Windows Welcome screen will be displayed, and will be logged in
automatically to Windows.