Toshiba Libretto W100 User Manual
Page 27
User’s Manual
1-13
Getting Started
Restoring the pre-installed software from the Recovery solid state
drive/created Recovery Media
A portion of the total solid state drive space is configured as a hidden
recovery partition. This partition stores files which can be used to restore
pre-installed software in the event of a problem.
If you subsequently set up your solid state drive again, do not change,
delete or add partitions in a manner other than specified in the manual,
otherwise you may find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your solid state drive, you may find that it becomes impossible
to setup your computer.
If the pre-installed files are damaged, you are able to either use the
Recovery Media you have created or the solid state drive recovery process
to restore the computer to the state it was in when you originally received it.
To perform this restoration, follow the steps below:
1. Turn off your computer.
2. Turn on your computer - when the
TOSHIBA Leading Innovation >>> logo screen appears, press
the Keyboard button to enter TOSHIBA Setup Manager.
3. Use the Keyboard button (emulating as arrow keys) to select the
appropriate option according to your actual status, and press the Home
button(emulating as ENTER key) to proceed.
4. Follow the on-screen instructions. You can operating by directly
touching the screen now.
When the sound mute feature has been activated, be sure to disable this
to allow sounds to be heard before starting the restore process.
When you reinstall the Windows operating system, the solid state drive will
be reformatted and all data will be lost.
To restore from the Recovery Media, load the recovery disc into the
external ODD or insert the recovery USB Flash Memory into the USB port.
For the buttons location, please refer to
.
When drivers/utilities are installed, you can setup the respective
drivers/utilities from the following place. To open the setup files, tap
Start All Programs TOSHIBA Applications and Drivers.